Measuring the Water Level for Household Needs

Most homeowners take for granted the amount of water level and pressure that come into their plumbing system. It is good to know the ideal pressure for residential use as too much of it can cause damages to the plumbing. Determining the water level and water pressure is easy and this is done simply by using tools like liquid level gauge and water pressure gauge. A liquid level gauge is a simple measuring tool that will determine the level of a particular water source. It can also be used with pressure gauge in order to see if the right pressure is installed for residential purposes.

Ideally, the right pressure (PSI) for residential use is 30 PSI. Too much PSI, which is more than 60 PSI, may damage the plumbing system. In case the water is sourced out from a municipal water system, the pressure should be between 20 and 50 psi. For buildings and bigger establishments, the ideal pressure is 60 psi or more. There is no standard water level for household use as the level varies on how much water is used. However, this can be measured by following these steps.

1.       Know the information about the well or the pump. The water may be sourced from a well or a pump. To start, it is best to know the pertinent information about where the water is coming from. Get data of the water well report, well identification number, and the pump information.

2.       Turn off the pump and record the level. Once the pump is turned off, leave it for two hours before measuring the actual level. This is to make sure that the water is static enough to give you an accurate reading from the liquid level gauge.

3.       Use sanitized equipment. It is good to sterilize the liquid level gauge in order to make sure that you will not contaminate the water. To do this, simply mix one cup of chlorine to a spray bottle at 20:1 ratio.

4.       Measure accurately. The water level can now be measured accurately using the gauge. The level has to be just right with the ideal water pressure.

These are the ways on how to accurately measure the water level. For more information, visit http://questtecsolutions.com/liquid-level-gauge/.